Heat pump installation Auckland
Heat pump installers Auckland-wide. Hi-wall heat pumps sized to the room and installed by registered electricians. Mitsubishi Electric, Daikin, Fujitsu and Panasonic. Free in-home measure and fixed-price quote.
- Registered electricians, CoC every job
- Trusted on hospitals, labs and studios
- Auckland-wide, Rodney to Pukekohe
Accredited and insured
- Site Safe member
- SiteWise Green
- NZ Green Building Council member
- NEBB certified
- IQP registered
- Registered electricians
A heat pump only performs as well as the install behind it. Undersized units run flat out and never get the room warm. Badly placed units throw air at the ceiling. Poor drainage ends in a wet wall. After twenty years of fixing other installers' shortcuts, we spend the extra half hour on the drain run and the mounting position.
Every install starts with a site visit. We measure the room, check the wall, the outdoor position and your switchboard, and talk through how you actually use the space before we recommend a model. You get a written quote with the unit, the electrical work and the Certificate of Compliance all included.
We are heat pump installers for the whole Auckland region: North Shore, West Auckland, Central, East and South, from the Hibiscus Coast down to Pukekohe. Most single-room hi-wall installs are booked within the week and finished in half a day.
What is included
- Room measurement and heating capacity calculation
- Supply of the unit, wall bracket, pipework and trunking
- Outdoor unit on wall brackets or a ground pad
- Dedicated circuit from the switchboard by a registered electrician
- Condensate drain run to a proper outlet, not the garden bed
- Vacuum and pressure test before commissioning
- Electrical Certificate of Compliance and manufacturer warranty registration
- Walkthrough of the remote, timers and filter cleaning
How it works
-
Tell us about the room
Fill in the form or call. A few questions about the room, insulation and how you use it.
-
Free site visit and written quote
An engineer measures up, checks the wall and switchboard, and quotes on the spot.
-
Installed in half a day
Most single units are done in three to five hours, tested, and signed off with a CoC.
Why the installer matters more than the brand
Mitsubishi Electric, Daikin, Fujitsu and Panasonic all make reliable hi-wall heat pumps. The difference between a unit that heats a room properly for fifteen years and one that struggles is almost always the installation: the capacity calculation, the indoor unit position, the drain run, the vacuum before commissioning and the electrical connection.
Clean Air Systems installs with HVAC engineers and registered electricians, not a salesperson and a subcontractor. The person who measures your room is the person responsible for the result.
What size heat pump do I need for an Auckland home?
A rough guide for a typical insulated Auckland room: 2.5 to 3.5 kW for a bedroom or study, 5 to 6 kW for a lounge, 7 to 8 kW for a large open-plan living and dining area. Older villas and bungalows with little insulation, high ceilings or big west-facing windows need more. Undersizing is the most common mistake we are called to fix, so we calculate the heating load instead of guessing from floor area.
Brands we install, service and repair
We recommend the model that suits the room and your budget rather than pushing one brand, and we work on every major make already on Auckland walls.
- Mitsubishi Electric
- Daikin
- Fujitsu
- Panasonic
- Hitachi
- Gree
- Haier
- Toshiba
- LG
Questions people ask
Which brands do you install?
Mitsubishi Electric, Daikin, Fujitsu and Panasonic. We recommend the model that suits the room, your budget and how you use it rather than pushing one brand.
How long does a heat pump installation take?
A standard hi-wall unit takes three to five hours. If the outdoor unit has a long pipe run or the switchboard needs work, we tell you at the quote stage.
What size heat pump do I need?
It depends on the room's floor area, ceiling height, insulation, windows and which way it faces. Undersizing is the most common mistake in Auckland homes. We calculate the heating capacity before quoting so the unit copes on the coldest July night.
Do I get a Code of Compliance?
Yes. Connecting a heat pump is prescribed electrical work. A registered electrician does it and issues an Electrical Certificate of Compliance, which insurers and property managers ask for.
How much does heat pump installation cost in Auckland?
It depends on the room, the unit, the pipe run to the outdoor unit and any switchboard work, so we do not quote off a price list. An engineer measures the room for free, recommends the right unit, and gives you a fixed written quote that includes the unit, the electrical work and the Certificate of Compliance. The quote is the price you pay.
Do you install heat pumps on the North Shore and in West Auckland?
Yes. We install across the whole Auckland region: North Shore, Hibiscus Coast, West Auckland, Central, East Auckland, Manukau, Papakura and Pukekohe. Travel is included in the quote.
How soon can you install a heat pump?
We call back within one business hour, visit for the free measure within a few days, and most installs are booked within the week after you accept the quote. If you are without heating, say so and we prioritise it.
Do you supply the heat pump or can I buy my own?
We supply and install. Buying through us keeps the unit, the installation and the warranty with one company, so there is no argument later about who is responsible if something fails.
Why Clean Air Systems
- HVAC engineers, not a sales rep and a subcontractor
- We size the unit, we do not guess
- Registered electricians on every job
- No add-ons on the day: the quote is the price
Heat pump installers across Auckland
Based in One Tree Hill, on the road from Warkworth to Pukekohe, Monday to Saturday. Travel is included in the quote. If your suburb is not listed, call and ask.
- Auckland Central
- North Shore
- West Auckland
- East Auckland
- South Auckland
- Manukau
- Albany
- Henderson
- Howick
- Botany
- Takapuna
- Mt Eden
- Remuera
- Onehunga
- Mt Wellington
- Papakura
- Pukekohe
- Hibiscus Coast
- Hobsonville
- Flat Bush
Related services
Ducted heat pumps
Whole-home ducted heat pump design and installation in Auckland. Zoned systems for new builds and existing homes, hidden in the ceiling, engineered by HVAC specialists.
Ducted heat pumps details
Multi-room systems
One outdoor unit running two to five indoor units. Multi-split heat pump design and installation for Auckland homes where ducted is not an option.
Multi-room systems details
Servicing and cleaning
Heat pump service and deep clean across Auckland: filters, coil, fan barrel, drain and refrigerant check by qualified technicians. Fixed price per unit, written report. North Shore, West, Central, East and South Auckland.
Servicing and cleaning detailsWhat Auckland customers say
Google Rating
Based on 10 reviews
“Our commercial building air conditioning needed a service and I contacted Clean Air Systems. An appointment was made promptly, a service man attended on time and did a great job. Very happy, thanks.”
Air conditioning service
“I recently had the pleasure of working with Clean Air Systems and I must say that their service was outstanding. From start to finish, they went above and beyond to ensure that my experience was excellent.”
Heat pump install
“Excellent service, professional behaviour, giving clear explanations of every service. I would like to refer this company for your healthy home assessments and heat pump services. Well mannered and knowledgeable technicians.”
Healthy Homes and heat pump
Book your free in-home quote
An engineer visits, measures the room and gives you a written price. The visit costs nothing and you can decide afterwards.
Call 028 411 1850Mon to Sat, 7am to 6pm